Image

Common washing machine errors in the home

Washing machine is an important appliance for every family today. With the high frequency of operation, it is inevitable that washing machine errors will occur during use. Below are some common washing machine errors that THT Vietnam has compiled. The washing machine does not work when the start button is turned on. Washing machine error […]

Washing machine is an important appliance for every family today. With the high frequency of operation, it is inevitable that washing machine errors will occur during use. Below are some common washing machine errors that THT Vietnam has compiled.

The washing machine does not work when the start button is turned on.

The washing machine does not work when the start button is turned on.

Washing machine error when turning on the start button but it does not start

Cause: You may not have pressed the Power switch and Start/Pause button, the power cord may be loose in contact with the outlet, or your power supply may be faulty.

How to fix: With this washing machine error , you need to press the Power switch and then press the START/PAUSE button, firmly plug the power cord into the outlet, check if your power source is damaged or not to fix it promptly.

Water does not flow into the washing machine

Check that the water supply tap is turned on and that the water supply is not cut off. If the water is still not flowing into the washing machine, check that the metal mesh at the water inlet is not blocked.

The washing machine is faulty when the washing water discharge time is too long.

This is also one of the most common washing machine errors that families often encounter. With this error, you should check whether the drain hose is distorted or not and check whether the drain hose is connected correctly as instructed.

The washing machine does not clean clothes and there is detergent residue on clothes.

The washing machine does not clean the clothes and the detergent is still on the clothes after washing.

The washing machine does not clean the clothes and the detergent is still on the clothes after washing.

Cause: You used too much detergent, or the wrong type of detergent as recommended by the manufacturer. The water temperature was too low. And you put too many clothes in compared to the actual capacity of the washing machine.

Solution: You should add detergent corresponding to the amount of clothes to be washed to avoid waste, save water and the clothes will be clean without detergent residue. If the water temperature is low, it will be difficult to dissolve the detergent, so you should dissolve it in warm water of about 40 degrees. In addition, add an amount of clothes suitable for the capacity of the washing machine.

Washing time is too long

This is one of the common errors that users often encounter when they do not know how to use the washing machine. Below are the causes and solutions you need to know.

Cause: Selecting the wrong washing mode, water source is not adjusted properly, low voltage.

Solution: Adjust the water supply appropriately, clean the water supply valve, check the voltage supplied to the machine (220V – 240V) and select the appropriate washing modes.

The washing machine makes noise and vibrates loudly when washing.

Cause : The washing machine is not placed in the right position, the machine is not balanced at the 4 corners. The clothes in the drum are twisted, metal objects are still in the clothes.

How to fix: Install the washing machine in a suitable position and adjust the washing machine so that it is not tilted, turn off the machine and check the clothes again, remove metal pieces to avoid damaging the inside of the washing machine.

Error of washing machine not spinning 

Cause: The washing machine lid is not closed properly, clothes are piled on one side of the spin drum, the drain pipe is clogged.

Solution: Close the washing machine lid tightly, clear the drain pipe, and readjust the laundry in the washing machine so that it is balanced and even.

Cannot drain water 

Cause: Water level and water pressure are set lower than normal.

Solution: Reset the water level to the appropriate level and readjust the water supply rate (standard is 15L/min).

No automatic power off at the end of the washing process

Cause: The machine’s power switch is stuck.

How to fix: With this washing machine error , you should not repair it yourself, but need to contact the warranty center for repair. 

Above is a summary of common washing machine errors encountered during use. THT Vietnam hopes that it will be of great help to you when your washing machine has problems. 

Same Category News

Image
thtvietnam
thtvietnam
thtvietnam
thtvietnam
thtvietnam
thtvietnam